Amada CMB150CNC - Metal Cutting Carbide Circular Saw CMB150CNC
Productivity Features
Parts are cut using an oblique-slide cutting mechanism. This ensures high precision positioning to +/- 0.01mm and an optimal rake angle for cutting bar steel. This design improves stability, resulting in higher precision and enhanced cutting rates.
- AMADA MACHINE TOOLS’ Unique Carbide Tipped Tool
The saw blade is a very important factor in realizing high speed, high precision cutting. Amada has developed a unique carbide-tipped circular saw that cuts cleanly and virtually burr free.
Specifications may change without notice at the sole discretion of Amada's Engineering Department.
- Capable of Cutting a Variety of Metal Materials
This machine can cut a wide variety of materials including round bar, flat bar, pipe and but in a range of materials like mild steel, stainless steels, tools steels and nonferrous materials.
- Spray-mist Lubricant reduces cutting fluid cleanup
This machine incorporates a semi-dry cut system that generates eco-friendly oil mist, thus work pieces get less wet while cutting; resulting in simplified downstream processes.
- No Clean-Up Process Needed for the Cut-Face
This machine makes highly precise cuts, the resulting cut-face being very clean. By eliminating the surfacing work, like when materials are band saw cut, total processing time is greatly reduced.
- Longer Circular Saw Blade Life
Using an oblique-slide (from the upper oblique direction) cutting mechanism and cermet carbide pads, which dampen most vibrations that result from cutting, lessens the wear of the saw blade. Resulting in much greater service life of the circular blades and noticeably reducing the costs/cut.
Specificaitons
Capacity
Cutting Capacity |
Round (Diameter) |
2.95" - 5.9" |
75 - 150 mm |
Rectangle (W x H) |
2.95" x 2.95" - 3.94" x 3.94" |
75x75 - 100 x 100 mm |
Maximum Stock Table Loading Capacity
Round Bars (Length x Diameter)
|
19.7 ft. x 5.9"
Or 11045 lbs. (*1)
|
6000 x 150 mm
Or 5010 kg (*1)
|
Incline Table Dimensions (Length x Width) |
17 ft. X 55.9" |
5401 x 1420 mm |
Blade and Saw Head
Saw Blade |
Blade Speed |
50-115 rpm, by Inverter |
Number of Teeth |
40 or 60
|
OD x Bore x T |
18.1" x 1.97" x 0.11" |
460 x 50 x 2.7 mm |
Saw Head |
Feed Drive |
AC Servo Motor with Ball Screw
|
Motors
Motors |
Saw Blade Motor |
20 HP |
15 kW |
Hydraulic Pump Motor |
2 HP |
1.5 kW |
Cut-to-Length Feed Motor |
3/4 HP, Servo Motor |
0.5 kW, Servo Motor |
Power Requirements
Power Requirements |
Power Supply Voltage |
AC220V±10%, 3PH, 60Hz
(All Other Voltages Require Transformer.)
|
Power Requirement |
39 kVA |
Hydraulic
Hydraulic |
Tank Capacity |
5.3 gal |
20 Liters |
Material Index
Material Index |
Index Mechanism |
Shuttle Vise |
Material Index |
AC Servo Motor and Ball Screw |
Stroke |
0.2" - 29.7" |
5 - 755 mm |
Length |
0.78" - 472.44"
(Multiple Indexing)
|
20 - 12000.0 mm
(Multiple Indexing)
|
End Trimming Length |
0.78" - 3.9" |
20 - 99 mm |
Remnant Length |
3.54"-3.54" plus Index Length |
90-90 mm plus Index Length |
Dimensions and Weight
Machine Dimensions (W x L x H) |
82.9" x 82.7" x 78.0" |
2105 x 2100 x 1982 mm |
Machine Weight |
7275 lbs. |
3300 kg. |
*1: Evenly Distributed Over Entire Table.

CMB150CNC Floor Plan PDF Download
Specifications may change without notice at the sole discretion of Amada's Engineering Department.
|