CPO 275 Series
The CPO 275 series cold saws are ideal for
cutting tubes, profiles and solids. These machines will produce burr
free cuts and in most applications eliminate the additional expense
of deburring. In cold sawing, big is not better. Big means the saw
is more expensive to purchase, the blades cost more to purchase and
re-sharpen. Unless your application requires more than a 3-3/8" diameter
capacity, this is all the saw you need. Mitering is standard equipment.
CPO 350 Series
For that big job, sawing up to 4-7/8" tube
or pipe, this 14" blade machine should be your choice. If your application
requires better than 25% of your activity in this larger diameter
material, we recommend the power down-feed model, even if you have
to stretch your budget some. Have you had bad experiences with heat
treating your parts with other cutting methods? It won't happen with
a cold saw.
CPO 350 NF Series
The Bewo non-ferrous machine was designed to
operate as quietly as possible in what is normally a very noisy environment.
The belt drive plus the carefully designed guard all work to this
end. Because you are able to move non-ferrous material very quickly,
power clamping becomes a very important option. Increased time savings
per part of 50% with the automatic clamping feature is well within
reach. As with all BEWO hand operated machines, mitering capabilities
are a standard feature.
|
|
